What Is Hyper Flake?

Hyper Flake is one of the two flake ranges in our epoxy flake system. Its flake blends are chosen to give the look of natural polished concrete.
If your concrete is too soft for polishing or you have a tight budget, then epoxy Hyper Flake is the flooring solution for you.
It's the same 5-layer system and the same installation as our Ultra Flake range. Only the flakes are different. The result is durable, water-, weather-, chemical- and UV-resistant, and easy to keep clean.
Epoxy Hyper Flake flooring comes in a deep, glossy, glass-like seamless finish offering a modern, durable, hygienic and grout-free floor.
This system is great for indoor and outdoor use, in residential, commercial and industrial settings.
‍

Get a free quote

Benefits of Hyper Flake

Hyper Flake flooring is ideal for residential and commercial areas, where the concrete is too soft for polishing or you have a tight budget.



Durable and Long Lasting

Five layers make Hyper Flake much thicker than a standard epoxy coating. With proper care it will last 10+ years, and every floor is backed by our 3-year warranty.



UV Stable and Moisture Resistant

Our UV-stable topcoat stops the floor yellowing in sunlight.
The epoxy primer forms a moisture barrier, which stops the new floor lifting or peeling. Together they make Hyper Flake a durable, cost-effective choice for driveways, patios and pool areas.



Modern Look

If you've always dreamed of having polished concrete, but your concrete is too soft or porous for it, then Hyper flake is the right choice for you.
Epoxy Flooring Redlands offers a wide range of Hyper Flake colour blends to choose from. You can get the polished concrete floor you've always dreamed of for a fraction of the price.



Easy to Clean

The seamless, non-porous surface stops liquids and dirt soaking in and helps prevent bacteria and mould. A damp microfibre mop is all it takes to keep it clean.



Chemical and Stain Resistant

Hyper Flake stands up to strong cleaning chemicals and resists stains, so it suits medical and educational facilities, commercial properties and homes.

Get A Quote Call Us

How We Install Hyper Flake

Without proper concrete slab preparation, your floor is destined to fail.
We spend a considerable amount of time mechanically grinding your floor. This is to remove all dirt and grime from it and achieve the correct concrete profile.
Once your concrete slab is clean and the pores are open, we move onto repairing any cracks and holes in the concrete.
Once we are happy with the look of your concrete we move onto applying a coat of epoxy primer. This primer coat acts a moisture barrier.
When the primer is fully cured (around 24 hrs), we apply the base coat and broadcast the Hyper Flake colour blend.
When the base coat is fully cured, we scrape off the excess flakes and apply two coats of UV-stable topcoat. The UV-stable topcoat stops your new flake floor yellowing over time.

Call Us Now: 0403 294 638